Tienes que preparar los siguientes elementos.

Camera Board	Cable de transferencia original del fabricante (si utiliza otros cables, asegúrese de que tienen capacidad de transferencia).	Ordenador con sistema operativo Windows
SD Card Reader & SD Card Please make sure to use a card reader to access files.	Charger or portable power bank. Do not use computer power supply, as it may not provide sufficient voltage and could result in non-operation.

Check Before Use

Confirm that the Micro SD Card is inserted into the adapter and is unlock.

 

1.Format the SD with the following setting:

*Right-click on your memory card or hard drive.

*Select the Fat32 (Default) format.

*Press OK to erase all data on the SD card.

 

2.Download the latest firmware update.

Descargar

3.Unzip the " FW96565A.bin " files to the memory card.

 

4.Insert the SD card with "FW96565A.bin" files into the camera.

5.Plug the camera into the power source and pay attention to the indicator light.

**Please be especially cautious not to use a computer or laptop as the power source.

 

6.Wait until the light flashes and remains steady (approximately 1-3 minutes). #Please be patient.

 

7.After the update is completed, use the "card reader" to remove all files from the SD card.

Please double-check to ensure that there are no files on the memory card. If files are not deleted, you will need to repeat step 5.

8.Enjoy your Papershoot camera!